When it comes to making gates work on their own, Ghost Controls is a name people trust. This company builds things that make gates smarter, safer, and easier to handle. One of their standout products is the Zombie Lock.
Understanding the Ghost Controls Zombie Lock
The Zombie Lock is a special type of gate lock made by Ghost Controls. This model, known as AXZL, is a clever lock that gives your gate an extra level of safety.
Weighing a mere 4.75 pounds, the Zombie Lock is compact with dimensions of 10.5 x 2.75 x 6.5 inches. It’s made from aluminum that’s been coated with a special powder, making it tough, light, and able to stand up to any weather.
The best part about this lock is its ability to lock and unlock without any help.
Key features of the Zombie Lock
This means the lock does its job without your help. When your gate opens or closes, the lock locks or unlocks. You don’t have to do it yourself. The Zombie Lock can be easily installed on either a single or dual gate. It includes a 20-foot cable for power and control, two mounting studs, two lock nuts, and four flat washers. For tubular gates, you can use the AXTB Tube Gate Bracket Kit (not included) for easy installation. The lock comes with a keyed cylinder, allowing you to manually unlock the gate with the included keys if needed. The Zombie Lock is built to last. It has a maximum weight capacity of 3000 pounds, proving its strength and durability. Moreover, the lock is weatherproof, promising optimal performance for many years.Automatic Functionality
Easy Installation
Manual Release
Durability and Performance
Installation of Ghost Controls Zombie Lock
Installing the Ghost Controls Zombie Lock is not a complex task. With the right tools, you can do it yourself. The lock is designed for easy setup on either a single or dual gate.
- Gather Your Tools: You’ll need the lock itself, the included 20-foot cable, two mounting studs, two lock nuts, and four flat washers. If you plan to install the lock on a tubular gate, also get the AXTB Tube Gate Bracket Kit (not included).
- Choose the Right Spot: Pick a spot on your gate where the lock will fit well. It should be a place where the lock can connect to the gate opener system.
- Mount the Lock: Use the mounting studs, lock nuts, and washers to secure the lock to your gate. For tubular gates, use the AXTB Tube Gate Bracket Kit.
- Connect the Cable: Take the 20-foot cable and wire it directly into the gate opener controller. This gives the lock power and allows it to control the gate.
- Test the Lock: Test the lock to make sure it’s working right. It should lock and unlock when the Automatic Gate Opener is activated.
For more help with installation, you can watch online videos or read the manuals on the Ghost Controls website. Technical support experts are also available for extra help.
YouTube Video Review – Ghost Controls Zombie Lock Review
Performance and Use
The Ghost Controls Zombie Lock works in sync with your automatic gate opener. When the gate opener is activated, the lock gets the signal. It unlocks to let the gate open and locks again once the gate is closed. This function keeps your gate secure at all times.
A key feature of this lock is the patented ZombieCode. It prevents the gate operator from moving before the lock confirms it’s in the unlocked position. It ensures your gate system stays locked even when the power is out. This function is exclusive to Ghost Controls opener systems.
The lock shows great performance in a dual gate setup. It can be installed on either side of the gate. It ensures both sides stay locked for maximum security. When the gate opener is activated, the lock on both sides unlocks at the same time.
The Zombie Lock is designed for durability. It’s made from powder-coated aluminum, which is both light and strong. It’s weatherproof, so it can handle harsh weather conditions. With a maximum weight capacity of 3000 pounds, this lock promises reliable performance for many years.
Troubleshooting Ghost Controls Zombie Lock
Even top-notch products like the Ghost Controls Zombie Lock may face issues. Don’t worry, most problems have simple solutions. Here’s how to handle some common issues:
Zombie Lock Not Working
If your lock isn’t working, check the connection with the gate opener controller. Make sure the 20-foot cable is wired correctly. Also, confirm the power source is functioning. If these look fine, the lock might need professional attention.
Common Ghost Controls Problems
A common issue can be the lock not syncing with the gate opener. In this case, make sure the ZombieCode function is working. The gate opener shouldn’t move before the lock confirms it’s unlocked. If problems persist, reach out to Ghost Controls’ customer service for expert help.
Non-Working Keypad
If your Ghost Controls keypad isn’t working, check its power source first. Make sure it’s receiving power and that the wiring is intact. If power isn’t the issue, reset the keypad to factory settings. Follow the reset instructions in the product manual. If the keypad still doesn’t work, it may need replacement.
Remember, you can always refer to online manuals and videos on the Ghost Controls website. Their technical support experts are also ready to help.
Pros and Cons of Ghost Controls Zombie Lock
Every product has its strengths and weaknesses, and the Ghost Controls Zombie Lock is no exception. Let’s discuss the main advantages and potential drawbacks.
FAQs on Ghost Controls Zombie Lock
Yes, but it works best with Ghost Controls openers. Some features may not work with other brands. Don’t worry. The lock stays locked when there’s no power. Your gate stays safe. Yes, it can be put on single or dual gates. For tube gates, use the AXTB Tube Gate Bracket Kit (not included). Yes, the lock is made to work well in all weather. It’s built to last a long time. No, it doesn’t need batteries. It connects to your gate opener for power. Yes, it comes with a set of keys. You can use them to unlock the lock manually. The lock can handle up to 3000 pounds of weight. It’s strong and sturdy. The package has the ZombieLock, a 20 ft. three wire cable, 2 keys for manual unlock, mounting studs, lock nuts, and washers. ZombieCode is a special feature. It stops the gate from opening until the lock is fully unlocked. It’s only available with Ghost Controls opener systems.Can this lock work with other gate openers?
What if the power goes out?
Does it fit all gates?
Can it handle bad weather?
Does the lock need batteries?
Can I manually unlock the Zombie Lock?
How much weight can the lock handle?
What’s included in the package?
What is ZombieCode?
Conclusion
The Ghost Controls Zombie Lock is a good pick if you need a strong lock for your gate. It works well with Ghost Controls gate openers. It can also work with other brands, but with some limits.
Installing this lock is not hard. You can do it yourself. The lock can be fitted on any gate – single or dual. Plus, it can stand up to bad weather, so it lasts long.
If you’re thinking about getting a lock for your gate, the Zombie Lock is a good option. It gives you peace of mind, knowing your gate is always secure. So, if you want to make your home safer, this lock is worth thinking about.