The DeWalt DW03101 comes with a smart end piece in the bottom. A small flap can be pulled out of the top of the tool. Due to its oblong shape, it is easy to use in tight spaces, so diagonal distances can be measured easily. It is very easy (and very accurate) to measure corners with the tool.
1/32-Inch (1.0mm) Accuracy – If you thought the last model was accurate, wait till you see what we’ve done for you this time around. In DeWalt’s estimation, this tool has a precision rating of 1/32-inch or 1mm.
The accuracy rating has just doubled to 330 feet due to the doubled range. Your measurements will now be taken from 100 meters (330 feet) away.
This difference arises from the integrated inclinometer in both products. As soon as you use it, you will feel like you are holding a magic wand. The following are some possible uses:
The scale of digital levels.
Continuum Height Calculator.
Distances horizontally indirect.
A room measurement tool can be used as a device to measure floors digitally instead of lugging around a long one. With only 7 inches in length and 10.4 ounces in weight, the DeWalt DW03101 is a very compact tool.
Use Laser Height Measurement Tool to Calculate Continuous Height – Point the outdoor laser distance measurer upwards and begin to move it down until it reaches the floor. Your wall’s height will be calculated automatically.
Distances on slopes are difficult to calculate since they are usually indirect. The DW03101 will provide you with an accurate reading since it takes angle into account.
An additional impressive feature missing from the DW03050 is the triangular area function. DW03101 measures triangular areas as well as rectangular ones, while model DW03101 can measure rectangular and volumetric areas only.
Backlit Line Display – You’ll notice that your display has an extra line, which is more noteworthy than you think. The tool can measure more than laser distance measuring machines can. This is because of the extra readings.
A memory capacity of 20 measurements can be stored with the DW03101. No more than 20 measurements will ever be required at once.
The Process of Accurate Measurement
In addition to its built-in inclinometer, the DW03101 is mainly used to level digitally. It is possible to measure surfaces accurately by aligning them and identifying their angle and position. Indirect height can be computed using Pythagoras if you use distance measurements.
Linear measurements can still be taken even when A and/or B are not available.
Inches/meters or feet/feet are displayed as the measurements. Measurements and calculations from the device can be stored in its memory for up to twenty seconds.